2014-'19 Chevy Silverado/Sierra 1500 Cat Back Exhaust System Legato
Was: Regular price $ 699.00 Sale price
100% STAINLESS STEEL – FULL SIZE MUFFLER DESIGN – LIFETIME WARRANTY
- High performance exhaust system.
- Medium/aggressive sound.
- Great sound and "no drone".
- 409 and 304 stainless steel construction.
- 4" polished stainless steel, double wall tip.
- True chambered muffler design, no packing material.
- Dual rear or side exit.
- Includes hangers and hardware for easy installation.
- DOES NOT FIT HD MODELS.
Product Specs
| Product Specifications | |
| Type of System | Cat Back |
| Mufflers | 1 |
| Outlet Diameter | 2.5" |
| Inlet Diameter | 3" |
| Heat Shield | None |
| Sound | Medium/Aggressive |
| Single/Dual | Dual |
| Rear/Side Exit | Rear or Side |
| System Material | 409 Stainless Steel |
| Tip Material | 304 Polished S/S |
| Tip Design | 4" Double Wall |
| 2WD/4WD | 2WD/4WD |
This is a dual rear exit axle back kit with medium aggressive sound.
Our 2014-'17 Chevrolet Silverado 1500 kit is perfectly tuned to generate an excellent performance exhaust note and enhance power and mileage. Constructed of 409 Stainless Steel and topped with 304 Stainless Steel double wall, polished tips, our system features a single chambered muffler that mounts in the factory location. From there the system splits into a dual exhaust tubes which feature factory-style hangers that connect to the body with supplied hardware and clamps. Both side exit and rear exit tubing is supplied so owners can pick the configuration they prefer.
Fitment
- 2014-'19 Chevy Silverado and GMC Sierra 1500's - 4.3L V6 and 5.3L V8 gas engines only.
- Fits Crew Cab 4WD and Double Cab 2WD/4WD
- Does not fit Crew Cab with 2-piece driveshaft.
- DOES NOT FIT HD MODELS
- 2017 Chevy Silverado 1500
- 2017 GMC Sierra 1500
- 2016 Chevy Silverado 1500
- 2016 GMC Sierra 1500
- 2015 Chevy Silverado 1500
- 2015 GMC Sierra 1500
- 2014 Chevy Silverado 1500
- 2014 GMC Sierra 1500
Customer Reviews
Dispite the emails saying that my order has shipped, and been fulfilled, I have not received my order.
Checked the box to make sure everything was there. I checked the instructions and only had one page when there should have been a few. Had to use a file to file down burs where the slots were made on the muffler to get it to slide over the 3 inch pipe all the way. Tighten all the clamps by hand, but couldn't get the clamps on the muffler to seal. I had to keep repositioning the clamps and used an impact gun on very low setting to get a seal. Also on muffler, dont know if it was left there to help drain moisture, but on one of the 2.5 outlets there is a hole in one of the welds. Decent system for the price and I'm content with the quality of sound.
Very pleased with it not to loud but not to quite its perfect!
Pros: the kit is complete and the pipe and muffler are good quality. The tips are nice but do need additional buffing as mine were dingy from manufacturing and not fully polished. The sound is deep and throaty but not loud and i have heard no droning.
CONS: My kit did not come with the plastic shipping inserts and i did have some out of round pipe. The kit is straight forward if you know what your doing but if its your first time your on your own except for email assistance. The web site number no one answers and the phone number on the instructions that says technical support says it doesn't accept phone calls so not helpful and i was missing the first 5 steps so i tried these several times to make sure i didn't miss anything. The WORST part is those freaking clamps! They are the desirable style but you will need a dose of roids, your "man pants", and a team of mules to tighten them down. I am 6-1 220lbs using an 18" Snap-On 3/8" ratchet and it was ALL I could do to tighten most of them to the point where the pipes stopped slipping and secured. I actually snapped off one of the 3/8" metric equivalent bolts trying to lock down a joint and had to get another clamp. The only other issue and this is minor but kicked in my ocd is the last offset piece for both sides is a flat offset and needs to be an off axis offest as the tips on both sides kind of point down and cant be leveled straight. Both sides are this way and the tips are short so it doesn't look like a mistake just a different look. All in all this is a good all inclusive kit and DOES SOUND GOOD just be ready for a workout. Took me about 3 1/2 to 4 hours to do on my back in the driveway with no special tools.
It came boxed up good and everything packed an bent right, fit was good, went on nice.My trouble was the clamps.They dont get tite anought to really hold the exhaust so I got some stainless exhaust U clamps to hold it and was fine..also the holders that go were the factory rubber are..well they slip out in places because theres nothing to stop them to like factory ones do. This is also why I used the clamps too.It was a good price on the system thow..Scott S in Bridgeville,DE
Like other reviews have said. I cut my old pipe out. Install was easy and very straight forward. Instructions were easy to follow. But you probably don't need them. Alignment took a few minutes to get the tips even and straight. Not a major issue. Once I started the truck I was even happier. Legato has knocked it out of the park here. The sound is exactly what I was looking for. Not overpowering inside the cab. Bit if you get into the throttle you hear a very sweet sound. 3 weeks in and I could not be happier. Quality parts and great value. Thank you Legato!!
Installed it today perfect fit and sounds great.
installation was a snap 3.25 hours in my drive way, the only draw back is the amount of torque it takes to tighten the band clamps but the sound makes up for it.
At a low idle I get a drowning noise that’s annoying. I have the resonator installed and the catalytic converter isn’t hollowed out so not entirely sure why it does this. Hopefully you can point me in the direction of a fix. Other than that great sound on start up, idle and when getting on it “I love the sound”. Fast delivery, quick install as well. For my stock exhaust removal I didn’t have to cut it in anyway and I didn’t the removal and install myself. Thank you again.
Very nice easy to put on and sounds great love it will tell everyone ware I got it.
2014-'17 Chevy Silverado/Sierra 1500 Cat Back Exhaust System Legato
2014-'17 Chevy Silverado/Sierra 1500 Cat Back Exhaust System Legato
2014-'17 Chevy Silverado/Sierra 1500 Cat Back Exhaust System Legato
Upon receiving the exhaust and the initial installation, I had a horrible drone between 1700-2100 rpm. I called into your company and was given a part number for a max-flow resonator. Once the resonator was installed, the drone was gone. I love the exhaust and you might want to include a tech note on future sales for a new Silverado 1500 to incorporate the max-flow resonator to block out the drone. I'm glad we were able to identify and resolve the problem without returning the exhaust to you. Joey
2014-'17 Chevy Silverado/Sierra 1500 Cat Back Exhaust System Legato
It a good kit for the price. The clamps on the other hand not so much. Tightened down with an impact gun to the point I broke a bolt. And it still had blow by. Stainless steel band clamps would be a better choice. Other then that great kit