Legato Performance
2005-2010 Ford Mustang GT V8 - 100% STAINLESS STEEL - Axle Back Exhaust Kit - Polished SS Tips
2005-2010 Ford Mustang GT V8 - 100% STAINLESS STEEL - Axle Back Exhaust Kit - Polished SS Tips
Couldn't load pickup availability
100% STAINLESS STEEL – FULL SIZE MUFFLER DESIGN – LIFETIME WARRANTY
- Including California Special and GT500.
- High performance exhaust system.
- Medium/aggressive sound.
- 409 and 304 stainless steel construction.
- 4" polished stainless steel, double wall tip.
- True chambered muffler design, no packing material.
- Includes hangers and hardware for easy installation.
- Lifetime Limited Warranty.
If you cannot see the audio controls, your browser does not support the audio element
Specifications: All stainless steel construction with main components of 409 stainless steel and the highly polished exhaust tips of 304 stainless steel.
Description: 2005-2010 Ford Mustang GT V8 Legato Axle Back Exhaust Kit
This exhaust kit fits 2005-'10 Mustang GT and GT500's and California Special with 4.6L or 5.4L V8 engine. This is a dual rear exit axle back kit with aggressive sound. This is comparable to the Flowmaster 40 series exhaust.
Customer Video
Installation video with 2015 Mustang GT
Product Specs
Product Specifications | |
Type of System | Axle Back |
Mufflers | 2 |
Outlet Diameter | 2.5" |
Inlet Diameter | 2.5" |
Heat Shield | None |
Sound | Medium/Aggressive |
Single/Dual | Dual |
Rear/Side Exit | Rear |
System Material | 409 Stainless Steel |
Tip Material | 304 Polished S/S |
Tip Design | 4" Double Wall |
2WD/4WD |
2WD |
The name Mustang is synonymous with high performance and the Legato Performance engineering team is well aware of that amazing legacy. Our performance exhaust systems are designed to unleash the power and sound locked within your factory Mustang exhaust with no loss of emission regulation compliance. Our Axle-back exhaust systems reduce back pressure and allow spent exhaust gasses to exit more quickly allowing a cleaner charge of fuel and air into the engine cylinders for enhanced combustion.
Using high quality, thick wall 409 stainless steel, mandrel bent free flowing tubing and chambered muffler construction, the Legato Performance Axle back Exhaust will outlast your Mustang. Backed by our limited lifetime warranty, our exhaust parts will not rust through - guaranteed! Topped by our signature Legato Performance 304 highly polished stainless steel, double wall tips, your Mustang will not only sound terrific, but look great. Adjustable hanger rods allow for perfect fitment to Mustang rear valance openings.
The easy to install axle back system uses the factory hanger mounts making the total time from removal of your stock system to installation of the Legato Performance Axle-back exhaust approximately a one-hour job for even the most novice enthusiast. Our kits come complete with all of the hardware you will need to install the system in your driveway, at home with simple hand tools – we are that confident of our design.
The fruits of your labor will be the sweet Legato Performance exhaust note that will be the performance payday you’re looking for. No drone, just improved performance and an exhaust note worthy of your Mustang!
With Legato Performance you get the sound of performance every time you turn the key. You could pay more with companies like Flowmaster, Magnaflow and Borla, but we deliver the best “bang for the buck” and awesome sound. Why not have the best of worlds; a high quality stainless steel exhaust, excellent muscle car tone and a few extra bucks in the your pocket?
Vehicle Fitments
The kit fits the following:
- 2010 Ford Mustang GT V8, 4.6L
- 2010 Ford Mustang Shelby GT500 V8, 5.4L
- 2009 Ford Mustang GT V8, 4.6L
- 2009 Ford Mustang Bullitt V8, 4.6L
- 2008 Ford Mustang GT V8, 4.6L
- 2008 Ford Mustang Bullitt V8, 4.6L
- 2007 Ford Mustang GT V8, 4.6L
- 2006 Ford Mustang GT V8, 4.6L
- 2005 Ford Mustang GT V8, 4.6L
Installation
- About 1 hour
- Installation instructions (PDF)
Share








Customer Reviews
Installation is on my 2010 Mustang GT Premium Convertible. The axle back exhausts lined up perfectly. The hangars lined up perfectly. BUT the slots precut for compression around the forward pipes were not properly finished to allow the clamps to tighten sufficiently. I used a Dremmel saw to free the compression area and then had no further problems. It would have been nice if I had realized the shortcoming defore mounting the first muffler. Otherwise, the installation is straight forward and relatively easy. The sound is great.
Sorry, I should have taken a picture.
The legato exhaust is great. It fit and looks good, A plus for looks sound and easy install. .I will buy legato mufflers for my next car.
Easy install once I was able to get rusty hanger bolts out. Sounds much better than stock and the tips look great.
Mufflers were very well packaged and protected from any routine shipping and handling issues. The mufflers came with very good OEM quality clamps and the mufflers were relatively easy to install. Passenger side went up without a hitch but the drivers side needed further adjustment at the H-pipe clamp in order to center at the rear bumper exhaust outlet. Noticeably a deeper tone and louder exhaust note from stock. The lower price than the competitors was my deciding factor as well as the stainless steel construction.
I had an axle bak system put on my Mustang… after 10 years with the stock exhaust, it was time to give her a little more grrrrr….
It sounds great no drone and not obnoxiously loud at idle… press the go pedal and sh snarls.
There was a fitment issue on the right side.. the exhaust tip stick out a half inch more than the left. he shop that dod it for me said I should see if anyone else has had that problem.
Looks great, fits well but the installation could have gone smoother. The notches on the stock exhaust are too large for the slots in the mufflers so they had to be cut off. The hanger bars are facing each other requiring the hangers to be removed before attaching the muffler to the exhaust. They sound good but not quite the Mustang Growl I was looking for but for the price I will keep them on for now.
Drone present in low rpm range when used with supercharger and aftermarket cams with these axle-back mufflers on remaining factory exhaust system on my 2009 Mustang Bullitt. The muffler inlets do not have notches to allow the pipes to slide into the orientation pin on each factory cat-back pipe which restricts proper adjustment.
I received the shipment quickly and planned to wait until spring to install my mufflers. However, I could not wait. I was able to install both mufflers in my garage with a few and tools in about 1 hour. Overall my stang sounds 100% better. The mufflers look and sound great. I would recommend these for sure.