2004-2008 Ford F-150 V8 Cat-Back Exhaust System - 100% STAINLESS STEEL- Polished SS Tips
2004-2008 Ford F-150 V8 Cat-Back Exhaust System - 100% STAINLESS STEEL- Polished SS Tips
SKU:LEX4210
Ready to ship2004-2008 Ford F150 V8 Cat Back Exhaust Kit
You drive a truck because you need the utility of a vehicle that can haul your stuff. But who says that your truck can’t have that great sound of high performance? Legato offers a complete series of dual cat back exhausts for V8-powered Ford F150 trucks of varying design from standard cab to double cab and everything in between. In addition, our kits include the perfect parts to allow for your choice of rear bumper or behind rear tire exhaust exit design (no special ordering required – each kit comes with both systems). Best of all, either design delivers increased power, and that awesome exhaust sound your truck deserves.
Using high quality, thick wall 409 stainless steel, mandrel bent free flowing tubing and Legato proprietary chambered muffler construction, the Legato Performance Cat-back Exhaust will last the life of your truck. Backed by our limited lifetime warranty, our exhaust parts will not rust through regardless of the terrain or elements. Topped by our signature Legato Performance 304 highly polished stainless steel, double wall tips, your truck will not only sound terrific, but look great. Adjustable hanger rods allow you to position the beautiful tips in the exact location to enhance the look of the truck.
The easy to install cat-back system uses the factory hanger mounts making the total time from removal of your stock system to installation of the Legato cat-back exhaust, a 90-minute job for even the most novice enthusiast. Our kits come complete with all of the hardware you will need to install the system in your driveway including and additional chassis hanger and isolator to position the driver’s side section of the dual exhaust.
Exhaust Kit Features
- Fits all F-150 wheelbases.
- High performance cat-back exhaust system.
- Medium/aggressive sound.
- Fits 2WD & 4WD.
- 100% 409 and 304 stainless steel construction.
- 4" highly polished stainless steel, double wall tip.
- True chambered muffler design, no packing material.
- Includes hangers and hardware for easy installation.
- Lifetime Limited Warranty.
Product Specifications
Type of System |
Cat-Back |
Mufflers |
1 |
Outlet Diameter |
2.5" |
Inlet Diameter |
3" |
Heat Shield |
None |
Sound |
Medium/Aggressive |
Single/Dual |
Dual |
Rear/Side Exit |
Rear or Side |
System Material |
409 Stainless Steel |
Tip Material |
304 Polished S/S |
Tip Design |
4" Double Wall |
2WD/4WD |
2WD |
Legato Exhaust Sound Sample for Ford F-150
Fits the Following Ford Models:
2008
- 2008 Ford F-150 STX V8, 4.6L 4.6
- 2008 Ford F-150 XL V8, 5.4L 5.4
- 2008 Ford F-150 XL V8, 4.6L 4.6
- 2008 Ford F-150 XLT V8, 5.4L 5.4
- 2008 Ford F-150 XLT V8, 4.6L 4.6
- 2008 Ford F-150 XLT V8, 5.4L 5.4
- 2008 Ford F-150 Limited V8, 5.4L
- 2008 Ford F-150 King Ranch V8, 5.4L
- 2008 Ford F-150 2WD/4WD all wheelbases
2007
- 2007 Ford F-150 STX V8, 4.6L 4.6
- 2007 Ford F-150 XL V8, 5.4L 5.4
- 2007 Ford F-150 XL V8, 4.6L 4.6
- 2007 Ford F-150 XLT V8, 5.4L 5.4
- 2007 Ford F-150 XLT V8, 4.6L 4.6
- 2007 Ford F-150 XLT V8, 5.4L 5.4
- 2007 Ford F-150 Limited V8, 5.4L
- 2007 Ford F-150 2WD/4WD all wheelbases
2006
- 2006 Ford F-150 STX V8, 4.6L 4.6
- 2006 Ford F-150 XL V8, 5.4L 5.4
- 2006 Ford F-150 XL V8, 4.6L 4.6
- 2006 Ford F-150 XLT V8, 5.4L 5.4
- 2006 Ford F-150 XLT V8, 4.6L 4.6
- 2006 Ford F-150 XLT V8, 5.4L 5.4
- 2006 Ford F-150 2WD/4WD all wheelbases
2005
- 2005 Ford F-150 STX V8, 4.6L 4.6
- 2005 Ford F-150 XL V8, 5.4L 5.4
- 2005 Ford F-150 XL V8, 4.6L 4.6
- 2005 Ford F-150 XLT V8, 5.4L 5.4
- 2005 Ford F-150 XLT V8, 4.6L 4.6
- 2005 Ford F-150 XLT V8, 5.4L 5.4
- 2005 Ford F-150 2WD/4WD all wheelbases
2004
- 2004 Ford F-150 STX V8, 4.6L 4.6
- 2004 Ford F-150 XL V8, 5.4L 5.4
- 2004 Ford F-150 XL V8, 4.6L 4.6
- 2004 Ford F-150 XLT V8, 5.4L 5.4
- 2004 Ford F-150 XLT V8, 4.6L 4.6
- 2004 Ford F-150 XLT V8, 5.4L 5.4
- 2004 Ford F-150 2WD/4WD all wheelbases
Customer Review Videos on the Legato F-150 Exhaust
"Install was on a 2007 F-150 Lariat with 5.4L and a K&N cold air intake. Interior decibel readings at 80mph (approximately 2100RPM) and cruise control on were 70db prior to install. After installing the system the truck registers a 71bd at 80mph with the cruise set. The system provides a nice grown under acceleration and no noticeable change in interior sound levels at cruising speeds. The system is as advertised a no drone system and I would purchase it again." - Bascum C. (customer)
Installation
Legato Performance Exhaust systems come complete with everything you need to install the system on your vehicle including detailed instructions, tubing, mufflers and clamps. Our systems work with the factory hanger designs and will easily replace the stock system meaning you can install the complete system in your driveway using simple hand tools. In most cases, no cutting of the factory exhaust is required because the Legato kit connects to the factory exhaust where natural breaks occur. If no break is present, a hacksaw to cut the tubing and a metal file to dress any sharp edges should be used.
Legato Performance Cat-Back Exhaust System Installation Guide and Documents
Looking for a Different Model Year?
Legato also offers a high-performance exhaust system for 2009-2014 Ford F-150 and the 2015-'20 Ford F-150.
Perfect. went on my FX4 with no problems. Just ha to get the right hangers and everything went as planned.
The exhaust sounds comparable to flowmaster super 44, just a bit deeper. Notice an increase in performance and no drop in fuel economy. Overall I love the fit finish and sound! Would highly recommend this exhaust!
Very fast shipping and easy transaction. I give it 5 stars...
Haven't installed exhaust yet...but I'm sure it will sound good...
06 F150 SCAB 4WD 4.6L This system is basic and cost effective. However, for a rear exit, to get it to fit and look correct I had to cut the drivers side. It was 3" off as far as being the same from the centerline of the truck. Thankfully I'm a welder by trade and it was a 15 minute adjustment/fix. Absolutely LOVE the sound though. For a $300 exhaust system, expect fitment issues. Some may be OK with it being off center but not me. I also got rid of the junk clamps because they were coming loose and wouldn't tighten any more. Problem solved, I welded all the joints with stainless .030 hard wire and it looks so much better now. On the exhaust tips, the clamp is tack welded where the bolt is on the bottom and very visible. I removed the clamp and welded it on as well. With a little work, you can make it a good exhaust system but out of the box is mediocre at best.
Installation was simple and the sound is great. The look is as beautiful as the sound. Thanks