2014-2017 Chevy Silverado 1500 & GMC Sierra 1500 Cat-Back - STAINLESS STEEL - Polished tips - Exhaust System
2014-2017 Chevy Silverado 1500 & GMC Sierra 1500 Cat-Back - STAINLESS STEEL - Polished tips - Exhaust System
SKU:LEX4217
Couldn't load pickup availability
2014-2017 Chevy Silverado/Sierra 1500 Cat-Back Exhaust Kit
Our 2014-'17 Chevrolet Silverado and GMC Sierra 1500 kit is perfectly tuned to generate an excellent performance exhaust note and enhance power and mileage. Constructed of 409 Stainless Steel and topped with 304 Stainless Steel double wall, polished tips, our system features a single chambered muffler that mounts in the factory location. From there the system splits into a dual exhaust tubes which feature factory-style hangers that connect to the body with supplied hardware and clamps. Both side exit and rear exit tubing is supplied so owners can pick the configuration they prefer.
Exhaust Kit Features:
- High performance cat-back exhaust system.
- Medium/aggressive sound.
- Great sound and "no drone".
- 409 and 304 stainless steel construction.
- 4" polished stainless steel, double wall tip.
- True chambered muffler design, no packing material.
- Dual rear or side exit.
- Includes hangers and hardware for easy installation.
- 4WD or Double Cab 2WD/4WD with 4.3L V6 or 5.3L V8 gas engine.
- DOES NOT FIT HD MODELS. For classic body only.
Product Specifications
| Type of System | Cat-Back |
| Mufflers | 1 |
| Outlet Diameter | 2.5" |
| Inlet Diameter | 3" |
| Heat Shield | None |
| Sound | Medium/Aggressive |
| Single/Dual | Dual |
| Rear/Side Exit | Rear or Side |
| System Material | 409 Stainless Steel |
| Tip Material | 304 Polished S/S |
| Tip Design | 4" Double Wall |
| 2WD/4WD | 2WD/4WD |
Fits the Following Chevy and GMC Models:
2014-'17 Chevy Silverado and GMC Sierra 1500's - 4.3L V6 and 5.3L V8 gas engines only. Fits Crew Cab 4WD and Double Cab 2WD/4WD, does not fit Crew Cab with 2-piece driveshaft.- 2017 Chevy Silverado 1500
- 2017 GMC Sierra 1500
- 2016 Chevy Silverado 1500
- 2016 GMC Sierra 1500
- 2015 Chevy Silverado 1500
- 2015 GMC Sierra 1500
- 2014 Chevy Silverado 1500
- 2014 GMC Sierra 1500
- DOES NOT FIT HD MODELS
Nice system installation was easy seems to be good quality my only complaint is a slight drone right around the shift point on normal driving 1800 rpm’s
Easy install sounds awesome!!
Checked the box to make sure everything was there. I checked the instructions and only had one page when there should have been a few. Had to use a file to file down burs where the slots were made on the muffler to get it to slide over the 3 inch pipe all the way. Tighten all the clamps by hand, but couldn't get the clamps on the muffler to seal. I had to keep repositioning the clamps and used an impact gun on very low setting to get a seal. Also on muffler, dont know if it was left there to help drain moisture, but on one of the 2.5 outlets there is a hole in one of the welds. Decent system for the price and I'm content with the quality of sound.
Very pleased with it not to loud but not to quite its perfect!
Pros: the kit is complete and the pipe and muffler are good quality. The tips are nice but do need additional buffing as mine were dingy from manufacturing and not fully polished. The sound is deep and throaty but not loud and i have heard no droning.
CONS: My kit did not come with the plastic shipping inserts and i did have some out of round pipe. The kit is straight forward if you know what your doing but if its your first time your on your own except for email assistance. The web site number no one answers and the phone number on the instructions that says technical support says it doesn't accept phone calls so not helpful and i was missing the first 5 steps so i tried these several times to make sure i didn't miss anything. The WORST part is those freaking clamps! They are the desirable style but you will need a dose of roids, your "man pants", and a team of mules to tighten them down. I am 6-1 220lbs using an 18" Snap-On 3/8" ratchet and it was ALL I could do to tighten most of them to the point where the pipes stopped slipping and secured. I actually snapped off one of the 3/8" metric equivalent bolts trying to lock down a joint and had to get another clamp. The only other issue and this is minor but kicked in my ocd is the last offset piece for both sides is a flat offset and needs to be an off axis offest as the tips on both sides kind of point down and cant be leveled straight. Both sides are this way and the tips are short so it doesn't look like a mistake just a different look. All in all this is a good all inclusive kit and DOES SOUND GOOD just be ready for a workout. Took me about 3 1/2 to 4 hours to do on my back in the driveway with no special tools.
